Hey First post on this forum so if I'm doing something wrong, please let me know! I have a 2013 Audi A5 which has been causing me a lot of problems lately. The main issue at the moment is my headlights. I understand they are fitted with some auto-adjusting sensors which determine an appropriate level for the headlights (I don't know a huge Ituses ultrasonic sensors located in the front and rear bumpers and on the sides. The driver only has to accelerate, brake and shift gears. The sensors measure parking spaces along the road while driving past them at moderate speed – a maximum of 20 km/h (12.4 mph) for perpendicular parking spaces and a maximum of 30 km/h (18.6 Test 1. As you rotate the sensor arm throughout a full 360 degrees of rotation; the voltage at pin #4 should swing between approx. 0.5 volts and 4.6 volts. It should swing two time for the 360 degrees revolution. 2. Look for a smooth voltage change as you move the arm slowly.
Seemore on our website: box diagrams (location and assignment of electrical fuses) Audi A5 / S
Theengine of the Audi S5 is a V-shaped petrol turbocharged six with a volume of 2995 cubic centimeters. The solid displacement and turbocharger allowed the power unit to develop 354 horsepower at 6,400 rpm and 500 Nm of torque at 4,500 revolutions of the crankshaft per minute.
Itcomes up fairly sporadic - my headlights and cornering lights seem to be working fine. After running VCDS scan the only fault codes that appear are as follows: Address 09: Cent. Elect. (J519) Labels:. 8K0-907-063.clb. Part No SW: 8K0 907 063 DJ HW: 8K0 907 063 DJ. Component: BCM1 1.0 H16 0103.
